D-D Spares
Model: DDPrime16Lens
AI Prime 16 / Hydra Lens
Product Overview
The AI Prime 16 / Hydra Lens is a replacement optical lens designed for use with AquaIllumination Prime 16 and Hydra series LED lighting units. It helps maintain proper light distribution and intensity, ensuring consistent illumination across the aquariu..
€14.99
Ex Tax:€12.19
Model: CSK34
Clarisea Cruciform Nut
Product Overview
The Clarisea Cruciform Nut is a replacement component designed for use within Clarisea filtration systems. This part features a central fixing hole that allows a machine screw to pass through the motor shaft, securing the cruciform in place and supporting ..
€4.99
Ex Tax:€4.06
Model: DD-CSK31
DD ClariSea Replacement Motor Module – All Models
Product Overview
The DD ClariSea Replacement Motor Module is a genuine replacement component designed for ClariSea filter systems. This motor module allows users to replace a faulty or worn motor, restoring the functionality of the filter without..
€99.99
Ex Tax:€81.29
Model: DD-CSK34
DD ClariSea Replacement Smart Controller – All Models
Product Overview
The DD ClariSea Replacement Smart Controller is a genuine replacement component designed for ClariSea automatic fleece filter systems. This controller manages the operation of the filter’s motor system, allowing the fleece ro..
€54.99
Ex Tax:€44.71
Model: DD-RUW259
DD Electronic Ballast With Alarm For 39W UV
Product Overview
The DD Electronic Ballast with Alarm for 39W UV units is a replacement control component designed for compatible D-D UV sterilisers. The ballast regulates the power supplied to the UV lamp to ensure stable and efficient operation. Inte..
€89.99
Ex Tax:€73.16
Model: DD-JFP001
DD Jumpguard Feeding Portal
Product Overview
The DD Jumpguard Feeding Portal is a practical accessory designed for mesh aquarium covers such as the Jumpguard system. It creates a dedicated opening for feeding fish and corals without needing to remove or lift the cover. The portal can be position..
€9.99
Ex Tax:€8.12
Model: DD-TC12075PRO
DD Jumpguard PRO DIY Aquarium Cover 120cm x 75cm
Product Overview
The DD Jumpguard PRO DIY Aquarium Cover is designed to help prevent fish from jumping out of open-top aquariums while maintaining excellent light penetration for corals and aquatic plants. Built with a slim, lightweight frame and ..
€59.99
Ex Tax:€48.77
Model: DD-FMR75LSLA
DD Lid Seal For FMR75 (Flat Section)
Product Overview
The DD Lid Seal for the FMR75 Media Reactor is a replacement sealing ring designed to maintain a secure connection between the reactor lid and body. This flat section seal helps ensure the reactor operates correctly by supporting a tight fit ..
€8.99
Ex Tax:€7.31
Model: DD-FMR75LSLB
DD Lid Seal For FMR75 (Round Section)
Product Overview
The DD Lid Seal for the FMR75 (Round Section) is a replacement O-ring designed for the D-D H2Ocean FMR75 Media Reactor. This sealing ring helps maintain a tight connection between the reactor components, supporting reliable operation and hel..
€8.99
Ex Tax:€7.31
Model: DD-FMR75F/CS
DD Mixed 1 x Fine / 1 x Coarse Sponge For FMR75
Product Overview
The DD Mixed Fine and Coarse Sponge Set is a replacement foam pack designed for the D-D H2Ocean FMR75 Media Reactor. This twin set includes both a coarse and a fine sponge, helping to support the proper function of the reactor by k..
€4.99
Ex Tax:€4.06
Model: DD-FMR75 BND
DD Replacement 90° Bend For FMR75
Product Overview
The DD Replacement 90° Bend for the FMR75 is a genuine replacement elbow fitting designed for use with the D-D FMR75 Fluidised Reactor. This component helps direct water flow through the reactor system and is intended as a direct substitute for ..
€2.99
Ex Tax:€2.43
Model: DD-FMR75 PEU
DD Replacement EU Pump For FMR75
Product Overview
The DD Replacement EU Pump for the FMR75 is a dedicated circulation pump designed for use with the D-D FMR75 Fluidised Media Reactor. This pump provides the flow required to move water through the reactor, allowing filtration media to function ef..
€31.99
Ex Tax:€26.01
Model: DD-FMR75 TAP
DD Replacement Flow Tap For FMR75
Product Overview
The DD Replacement Flow Tap for the FMR75 is a genuine spare component designed for the D-D FMR75 Fluidised Media Reactor. This tap allows users to control and adjust the water flow entering the reactor, helping maintain the correct circulation ..
€2.99
Ex Tax:€2.43
Model: DD-FMR75 LID
DD Replacement Lid For FMR75
Product Overview
The DD Replacement Lid for the FMR75 is a genuine spare part designed for the D-D H2Ocean FMR75 Fluidised Media Reactor. This lid forms the top closure of the reactor chamber, helping secure the internal components while allowing the reactor to opera..
€9.99
Ex Tax:€8.12
Model: DD-FMR75 SCR
DD Replacement Lid Screws For FMR75
Product Overview
The DD Replacement Lid Screws for the FMR75 are genuine spare fasteners designed for use with the D-D H2Ocean FMR75 Fluidised Media Reactor. These screws are used to secure the reactor lid in place, helping maintain the structural integrity of..
€2.99
Ex Tax:€2.43
Model: DD-FMR75 NRV
DD Replacement Non Return Valve For FMR75
Product Overview
The DD Replacement Non Return Valve for the FMR75 is a genuine spare component designed for the D-D H2Ocean FMR75 Fluidised Media Reactor. This valve helps control the direction of water flow within the reactor system, preventing water f..
€2.99
Ex Tax:€2.43
Model: DD-AI PSU PRIME
DD Replacement PSU For Prime
Product Overview
The DD Replacement PSU for Prime is a power supply unit designed for use with Aqua Illumination AI Prime and AI Prime HD aquarium lighting systems. This compact power adapter provides the electrical power required for the light to operate and serves ..
€94.99
Ex Tax:€77.23
Model: DD-AI PSU H26
DD Replacement PSU For Sol / Vega / Hydra / Hydra26 / Hydra32
Product Overview
The DD Replacement PSU for Sol, Vega, Hydra, Hydra 26 and Hydra 32 is a power supply unit designed for compatible Aqua Illumination aquarium lighting systems. This unit provides the required power for the light fixtur..
€114.99
Ex Tax:€93.49
Showing 1 to 18 of 18 (1 Pages)